Computer Accessories (721)

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

FEATURESSuper-High Efficiency, 80 PLUS® Gold Certified Fully ModularATX 3.0 and 16-Pin PCIe Gen 5 Cable (12VHPWR)Top-Quality 135 mm Fluid Dynamic Bearing FanPremium Hybrid Fan ControlTight Voltage Regulation (12 V, 5 V and 3.3 V) [± 3 %]Gold Plated High Current Terminal (MB, CPU and PCIe)SPECIFICATIONS Technical Specifications 80PLUS ® Gold Cybenetics Efficiency Level TBA Cybenetics Noise Level TBA Form Factor Intel ATX 12 V Dimensions 160 mm (L) x 150 mm (W) x 86 mm (H) Fan Information Fan Size 135 mm Fan Control Digital Fan Control Fan Bearing Fluid Dynamic Bearing Life Expectancy 50,000 hours at 40 °C, 15 % - 65 % RH Cable Information Modularity Fully Modular Cable type Flat white cables Electrical Features Operating Temperature 0 - 50 °C (derating from 100 % to 80 % from 40 °C to 50 °C) MTBF @ 25 °C, excl. fan 100,000 hours AC Input Full Range Protection OPP, OVP, UVP, OCP, OTP, SCP Safety and Environmental Safety and EMC cTUVus, TUV, CB, CCC, BSMI, EAC, CE Environmental Compliance Energy Star, RoHS, WEEE, ErP Lot 6, REACH Warranty 10 Years Power Output AC Input Voltage: 100 V - 240 V Current: 15 - 7.5 A Frequency: 50 Hz - 60 Hz DC Output Rail +3.3 V +5 V +12 V -12 V +5 VSB Maximum Power 25 A 25 A 100 A 0.3 A 3 A 125 W 996 W 3.6 W 15 W Total continuous power 1200 W

The SC314 SATA Mobile Rack lets you turn a standard 5.25 inch CD-ROM space into a 3.5 inch hard drive dock. It features a SATA interface to deliver the performance you expect from SATA, SATA II, and SATA III hard drives. Tool Free allow mounting or unmounting Hard Drive without Tools and Screws in seconds. Designed to provide a durable and reliable operation, the mobile rack features high quality solid metal construction. With support for SATA3 up to 6Gbps, this mobile rack backplane is ideal for RAID installations to ensure maximum performance and versatility for enhanced storage applications. Trayless design with hot swapping that makes it the ideal solution for quick and easy drive removals and insertions as part of a system building process, or integration into rackmount systems or industrial environments. Feature Tool Free allow to mount or unmount 3.5” Hard Drive without Tools and Screws in Seconds Holds a 3.5" SATA drive in a front accessible 5.25" bay Trayless design, drives are not mounted into separate trays/enclosures Supports 3.5" form factor SATA hard drives Plug-and-Play and Hot-Swap compatible (for AHCI mode) Stylish brushed Front Panel Design Ideal for environments where drives need to be replaced/removed regularly Specifications Form Factor: 5.25 inch Optical Drive Bay Supported HDD Type:3.5 inch SATA I/II/III (1.5/3.0/6.0 Gbps) Insertion Rating: 50000+ Cycles Hot Swap Capability: Yes Material Type: Metal and Plastic Operating Temperature: 0°C to 50°C Compatibility: OS independent; No software or drivers required Dimension: 184 x 149 x 42 mm Package Contents 1x Internal 5.25" Bay Mobile Rack for 3.5" HDD 1x Screw Kit 1x User Manual

Simplecom SE301 3.5" SATA to USB 3.0 Hard Drive Docking Enclosure SE301 connects your SATA Drive to your PC via SuperSpeed USB 3.0 interface. With unique removable top cover design, you can use it as a normal external HDD enclosure or a HDD docking by uninstalling the top cover. SuperSpeed USB 3.0 interface enable the data transfer speed of SATA hard drives up to 5Gbps, also with enhanced with UASP (USB Attached SCSI Protocol), the SATA drives can even perform faster than conventional USB 3.0. Invisible ventilation holes on the bottom to ensure better heat dissipation and stable operation. SE301 offers convenience, speed and portability for data storage solution, sharing and transporting data could never be easier. Features: Removable top cover, use as HDD enclosure or docking Supports 3.5" SATA1/2/3 HDD as enclosure Supports 2.5" or 3.5" SATA1/2/3 HDD/SSD as docking Transfer Rates up to 5Gbps when connected to a USB 3.0 port On/Off power switch LED light indicates Power and Activity status Ventilation holes on the bottom to ensure better heat dissipation Hot-swappable, plug and play, no drivers needed Backwards-Compatible with USB 2.0 and USB 1.1 Dimensions: 193mm x 114mm x 33mm (LxWxH) System requirements Available USB 3.0/2.0 port on the computer Operating System: Windows XP and above, Linux, Mac OS 10.4 and above Package Content: 1x SE301 1x Power Adapter 1x Screw driver 2x Screws 1x USB3.0 Cable 1x User Manual]

Simplecom SE301 3.5" SATA to USB 3.0 Hard Drive Docking Enclosure SE301 connects your SATA Drive to your PC via SuperSpeed USB 3.0 interface. With unique removable top cover design, you can use it as a normal external HDD enclosure or a HDD docking by uninstalling the top cover. SuperSpeed USB 3.0 interface enable the data transfer speed of SATA hard drives up to 5Gbps, also with enhanced with UASP (USB Attached SCSI Protocol), the SATA drives can even perform faster than conventional USB 3.0. Invisible ventilation holes on the bottom to ensure better heat dissipation and stable operation. SE301 offers convenience, speed and portability for data storage solution, sharing and transporting data could never be easier. Features: Removable top cover, use as HDD enclosure or docking Supports 3.5" SATA1/2/3 HDD as enclosure Supports 2.5" or 3.5" SATA1/2/3 HDD/SSD as docking Transfer Rates up to 5Gbps when connected to a USB 3.0 port On/Off power switch LED light indicates Power and Activity status Ventilation holes on the bottom to ensure better heat dissipation Hot-swappable, plug and play, no drivers needed Backwards-Compatible with USB 2.0 and USB 1.1 Dimensions: 193mm x 114mm x 33mm (LxWxH) System requirements Available USB 3.0/2.0 port on the computer Operating System: Windows XP and above, Linux, Mac OS 10.4 and above Package Content: 1x SE301 1x Power Adapter 1x Screw driver 2x Screws 1x USB3.0 Cable 1x User Manual

Features: Model: USB-C 65WModel No: HKA06520033-016 Specifications: Input voltage: 100-240VACInput frequency: 50/60HzOutput Watt: 65WOutput: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25AOperating temperature: 0°C to +40°CDimensions: 9.65(L) / 4.62(W) / 3.0(H)cm (Cable length not included) Package Content:  1x HUNTKEY USB -C 65W NOTEBOOK ADAPTER (HKA06520033-016)

Simplecom SA536 USB to M.2 and SATA 2-IN-1 Adapter for 2.5"/3.5" HDD & NVMe/SATA M.2 SSD with Power Supply USB 3.2 Gen2 10Gbps SA536 is a 2-IN-1 USB adapter with SATA and M.2 sockets. This dual slot adapter is an all in one solution for most common storage drives, SATA socket supports 2.5" and 3.5" SATA HDD or SSD, M.2 socket supports both NVMe and SATA protocol based M.2 SSDs. With the toggle switch, you can quickly select between SATA and M.2 modes. Plug and play and easy to use, this adapter lets you easily access and swap SATA or M.2 drives without having to install your drives into an enclosure or PC tower. USB 3.2 Gen 2 interface for super-fast read and write speed up to 10Gbps. No need to worry about which type of SATA or M.2 drive you have, this adapter can convert any SATA or M.2 drive to USB for easy access on your computer. Perfect for fast access of all types of SATA HDDs and M.2 SSDs, and can be used for data migration, data backup and more. This adapter comes with an external power supply, which enables the adapter to power and access desktop 3.5" SATA hard drive, and no external power needed for 2.5” SATA drive and M.2 SSD. Features 2-IN-1 USB adapter with SATA and M.2 sockets Supports NVMe and SATA M.2 SSD Supports 2.5" and 3.5" SATA HDD/SDD with SATA I/II/III interface Toggle button to quickly switch between SATA and M.2 USB 3.2 Gen2 interface support up to 10Gbps data transfer rate Plug and play, no driver required Supports USAP for faster data transfer speed and maximum performance Supports TRIM command for improved data writing to extend SSD life With external power adapter for 3.5" hard drives LED light indicates Power and Activity status Specifications Model: SA536 Interface: USB-C (USB 3.2 Gen 2) Transfer Rate: up to 10Gbps NVMe Slot Support: NVMe or SATA M.2 SSD (2230 / 2242 / 2260 / 2280) SATA Slot Support: 3.5" or 2.5" SATA HDD/SSD Main material: ABS Plastic Power Input: DC 12V2A Dimensions: 108 x 44 x 24mm (LxWxH) Weight: 49g (without power adapter) Supported Operating Systems: Windows 7 and above, Mac OS 10.8 and above Package Contents 1x USB to SATA and M.2 Adapter 1x AC Power Adapter 1x USB-C to USB-A Cable 1x USB-C to USB-C Cable Rubber Standoff for M.2 SSD User Manual Important Note External power is Not required when using 2.5" SATA drive or M.2 SSD, they can be powered by USB. External power is required for 3.5" SATA HDD, please connect USB cable before connecting power cable. SATA and M.2 sockets can't be used simultaneously, toggle button need to be selected to SATA or M.2 mode.

The LDT63-C012 Monitor Arm Mount is an economical choice for adding flexibility and ergonomics to the work place. Durable steel and aluminum construction supports most 17'-32' monitors up to 9kg/19.8lbs. Finger-tip adjustment allows for effortless maneuvering and a wide range of motion to position screen height and angle. Integrated 180° rotation stop prevents the arm from hitting adjacent partitions and walls. A quick-release joint design reduces package size for lower shipping and storage costs while contributing to easy user assembly. The slim and modern design in 2 colors fits most any office or home décor. FEATURES ●Spring-Assisted Mechanism: allows to easily move up and down ●Integrated 180° Rotation Stop: prevents monitor arm from swinging into screens or walls ●Two Mounting Options: both desk clamp and grommet are included ●Reduced Package Size: relatively lower transport costs and strorage fees (perfect for e-commerce platform sellers) ●Ease of Use: self-adjusting counterbalance for most any monitors ●Keyhole Pattern: allows for easy installation ●Built-in Cable Management: for an organized and neat workspace SPECIFICATIONS Product Category: Mechanical Spring Monitor Arm Rank: Standard Material: Aluminum,Steel,Plastic Surface Finish: Powder Coating Color: Matte Grey Dimensions: 117x520x655mm (4.6'x20.5'x25.8') Fit Screen Size: 17'-32' Fit Curved Monitor: Yes Screen Quantity: 1 Weight Capacity (per screen): 2~9kg (4.4lbs~19.8lbs) VESA Compatible: 75x75,100x100 Tilt Range: +55°~-55° Swivel Range: +90°~-90° Screen Rotation: +180°~-180° Arm Full Extension: 515mm (20.3') Installation: Clamp,Grommet Suggested Desktop Thickness: Clamp：10~80mm Grommet：10~40mm (Clamp：0.39'~3.1' Grommet：0.39'~1.6') Quick Release VESA Plate: No USB Port: No Cable Management: Yes Direction Indicator: Yes Anti-theft: No Accessory Kit Package: Compartment Polybag,Normal/Ziplock Polybag

The AWM-FH dual plate desk clamp is a part of the Atdec modular family. It is recommended for all 750mm post solutions and other configurations with extra heavy screens. The dual plate design provides additional stability when it\'s required. Suitable for desks up to 68mm in thickness.

The AWM-P75G is a part of the Atdec modular family. This post is typically used when mounting displays in two rows or when extra height is required for single, dual or triple configurations. To make the display alignment easier the post features guide marks which serve as a reference for setting the height of each arm. This is particularly useful in projects with multiple installations.

Youre looking at the latest One-BLUE licensed Multi-Region Blu-Ray Player from LASER the undisputed best-selling Multi Region Blu Ray player in Australia! Its the only Blu Ray player with a 3-year warranty giving you peace of mind.Enjoy different media files with a terrific picture and sound quality on this multi-region Blu-Ray and DVD play player. This player works as a universal Blu-ray, DVD and CD player and easily connects to a TV or Home theatre system via an HDMI cable or the old red/white RCA cables. Key Features:Blu Ray and DVD Region unlocked so you can play any DVD or Blu-Ray movie bought anywhere in the world! DVD upscaling it makes your DVD or low-resolution movies look like Full High Definition 1080 Blu Ray movies.HDMI and composite video output where other players only offer HDMI out the BD3000 offers HDMI and composite for new and old TVs. True multi-channel surround sound output not just 2.0 but Dolby Digital and DTS 5.1 or 7.1 surround soundConnect to home theatre systems and TVs via the HDMI port and enjoy picture-perfect video clarity and crystal-clear sounds Support for all major media formats: BD-video, AVI (Xvid and MPEG 4), Divx (1-4), MKV, MP3, JPEG, PNG, and othersDLNA for playback of content on other devices in your home network (like playing back a movie / pictures from your PC/NAS/HDD/Gaming Console)Official One Blue Licensed product Endorsed, licensed, and certified by the Blu Ray Alliance. (Hint: no hologram One Blue sticker = no license (illegal import)3-year warranty were so confident in the quality of our BD3000 that we offer you an industry leading guarantee!

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision o   Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

ABSpro™ ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament – which has been reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) – resulting in an incredibly strong and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for printing mechanical parts with high precision and fine detail and has exceptional endurance properties.   Unique features Extremely strong and impact resistant Extremely high printing precision High gloss Good chemical resistance Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 245 - 275° C * Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 110 - 120° C * Fan speed: 0-25% Experience level: Expert   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. *) Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.     Filament length   ρ: 1.05 g/cc 50 gr coil 0.5 Kg spool       Ø 1.75mm ± 19.8m ± 198m       Ø 2.85mm ± 7.5m ± 75m      

AquaSolve™ PVA AquaSolve is a high-end cold water soluble PVA (PolyVinyl Alcohol ) type of 3D printer filament, which bonds very well to a variety of (thermo)plastics – such as PLA, PETG, ABS, and more  – that print within a similar temperature range. This makes AquaSolve an excellent PVA support material for dual extrusion prints. AquaSolve™ PVA has a limited smell during printing and is non-toxic and biodegradable once dissolved in water. Unique features Excellent (cold) water solubility Great support material for complex dual extrusion prints! Good bonding to various (thermo)plastics Very limited smell during printing Biodegradable once dissolved in water General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 205° C * Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 0-25% Experience level: Expert (*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. (*) Do not exceed a printing temperature of 225??à_C, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. Printing with PVA materials does require a certain level of 3D printing expertise as PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being printed.      Filament length  ρ: 1.23 g/cc 50 gr coil 0.3 Kg spool Ø 1.75mm ± 16.9m ± 101m Ø 2.85mm ± 6.4m ± 38m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands (*) RoHS amp; REACH compliance in accordance with: RoHS Directive 2011/65/EC -amp;- REACH Directive 1907/2006/EC.

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Atlas Support Atlas Support is the next generation in PVA water-soluble support materials for FFF/FDM 3D printing. Atlas Support is the result of extensive research to PVA improvement which has resulted in an unique formulation where numerous PVA grades have been blended into one superior water soluble support material with improved thermal stability. Atlas Support has good bonding to a wide variety of materials – such as PLA, ABS, PETG, ASA, HIPS, et cetera  – and is much less sensitive to degradation by humidity. Unique features Excellent water solubilityo   Excellent support material for complex dual extrusion prints! Improved thermal stabilityo   Much lesser risk of clogged nozzles caused by deteriorating/crystalizing material in (too) hot nozzle Good bonding to various (thermo)plastics Odourless processing Biodegradable once dissolved in water General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 205° C * Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 0-25% Experience level: Expert  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. *) Do not exceed a printing temperature of 225??à_C, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. Printing with PVA materials does require a certain level of 3D printing expertise as PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being printed.      Filament length  ρ: 1.22 g/cc 50 gr coil 0.3 Kg spool Ø 1.75mm ± 17.0m ± 102m Ø 2.85mm ± 6.4m ± 39m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

EasyFil™ ABS - Glow in the Dark EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Abrasiveness Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature.  In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

TitanX™ TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament. TitanX is the evolution of ABS into a warp-free filament with unsurpassed mechanical properties and is extremely suitable for 3D printing large scale and high precision engineering objects. TitanX is truly FFF/FDM-optimized as it has zero warping, a perfect interlayer adhesion and can be printed directly on a heated glass plate without any adhesives or tapes to be used.   Unique features FDM/FFF-optimized o   Warp-free printing o   Optimized filament flowing behaviour and inter-layer adhesion o   Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength High impact resistance Much less smell compared to when printing with “normal” ABS-based filaments Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 240 - 260° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.10 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.9m ± 283m ± 869m ± 1701m ± 3024m Ø 2.85mm ± 7.1m ± 107m ± 328m ± 641m ± 1140m

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

ClearScent™ ABS ClearScent ABS is an extremely printer friendly Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene type of 3D printer filament which is transparent in its original form and doesn’t produce any unpleasant odours when being 3D printed. Besides its transparency and odourless processing features ClearScent ABS is nearly warp-free, has an excellent thermal stability and its 3D printing flowing behaviour is fine-tuned for optimal 3D printing results.   Unique features Transparent ABS filament o   90% light transmittance with 2.2% haze Nearly odourless processing / printing Very easy to print o   Warp-free printing and no deformation after cooling o   Improved flowing behaviour and inter-layer adhesion o   Good first layer adhesion to several heated print surfaces Good chemical resistance Post-processing with Acetone , TetraHydroFuran (THF) and other Analogous Solvents Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 100° C Fan speed: 0-25% Experience level: Beginner   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.   Filament length   ρ: 1.06 g/cc 50 gr coil 0.75 Kg spool       Ø 1.75mm ± 19.6m ± 196m       Ø 2.85mm ± 7.4m ± 74m      

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Brother€™s P-touch CUBE Pro (PT-P910BT) gives you the ability to print customised labels up to 36mm in width by choosing from a wide variety of tapes or ribbons to give your business a professional image. Built-in Bluetooth enables wireless printing from your smartphone, tablet, PC or Mac using the free desktop, iOS and Android label design apps. The mobile and compact PT-P910BT includes a long-life rechargable Li-ion battery and Software Development Kits (SDKs) available for Android, iOS and Windows - designed for flexibility, it€™s your professional organiser whether you€™re at work or on the go.

ClearScent™ ABS ClearScent ABS is an extremely printer friendly Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene type of 3D printer filament which is transparent in its original form and doesn’t produce any unpleasant odours when being 3D printed. Besides its transparency and odourless processing features ClearScent ABS is nearly warp-free, has an excellent thermal stability and its 3D printing flowing behaviour is fine-tuned for optimal 3D printing results. Unique features Transparent ABS filament 90% light transmittance with 2.2% haze Nearly odourless processing / printing Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several heated print surfaces Good chemical resistance Post-processing with Acetone , TetraHydroFuran (THF) and other Analogous Solvents Engineered to be compliant to FDA food and drink contact articles General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 100° C Fan speed: 0-25% Experience level: Beginner  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.06 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 19.6m ± 196m Ø 2.85mm ± 7.4m ± 74m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

EasyFil™ PLA EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament. Unique features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors Engineered to be compliant to FDA food and drink contact articles  General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 180 - 220° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

EasyFil™ ABS EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments. Unique features Superb process stability and limited warping Significant higher impact resistance than average ABS Very strong and durable Light-weight Viscat softening temperature of ± 103° C Wide variety of vivid opaque colors General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-25% Experience level: Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length  ρ: 1.03 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 303m ± 928m Ø 2.85mm ± 7.6m ± 114m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

ABSpro™ ABSpro is a professional high-strength ABS (Acrylonitrile Butadiene Styrene) based 3D printer filament – which has been reinforced with a mixture of Styrene Maleic Anhydride (SMA) and PolyCarbonate (PC) – resulting in an incredibly strong and even more impact resistant filament. ABSpro is extremely strong, has an high gloss and is extremely suitable for printing mechanical parts with high precision and fine detail and has exceptional endurance properties.   Unique features Extremely strong and impact resistant Extremely high printing precision High gloss Good chemical resistance Engineered to be compliant to FDA food and drink contact articles     General printing guidelines *   Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 106% Print temp: ± 245 - 275° C * Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 110 - 120° C * Fan speed: 0-25% Experience level: Expert   *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. *) Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.     Filament length   ρ: 1.05 g/cc 50 gr coil 0.5 Kg spool       Ø 1.75mm ± 19.8m ± 198m       Ø 2.85mm ± 7.5m ± 75m      

Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and flowing behaviour, which is essential for 3D printing. Unique features Great process stability and filament flowing behaviour No-nonsense ABS Easy to post-process Good physical features General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 104% Print temp: ± 220 - 270° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 110° C Fan speed: 0-30% Experience level: Intermediate *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.03 g/cc 50 gr coil 1 Kg spool 2.3 Kg spool Ø 1.75mm ± 20.2m ± 404m ± 928m Ø 2.85mm ± 7.6m ± 152m ± 350m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

ClearScent™ ABS ClearScent ABS is an extremely printer friendly Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene type of 3D printer filament which is transparent in its original form and doesn’t produce any unpleasant odours when being 3D printed. Besides its transparency and odourless processing features ClearScent ABS is nearly warp-free, has an excellent thermal stability and its 3D printing flowing behaviour is fine-tuned for optimal 3D printing results. Unique features Transparent ABS filament 90% light transmittance with 2.2% haze Nearly odourless processing / printing Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several heated print surfaces Good chemical resistance Post-processing with Acetone , TetraHydroFuran (THF) and other Analogous Solvents Engineered to be compliant to FDA food and drink contact articles General printing guidelines *  Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 220 - 260° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 90 - 100° C Fan speed: 0-25% Experience level: Beginner  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.06 g/cc 50 gr coil 0.75 Kg spool Ø 1.75mm ± 19.6m ± 196m Ø 2.85mm ± 7.4m ± 74m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

ApolloX™ ApolloX is a professional high-performance engineering filament, which is based on an uniquely industrial-grade modified ASA (Acrylonitrile Styrene Acrylate) compound. ApolloX has been modified to have great thermal stability, improved filament flowing behavior, zero-warping and flawless first- and interlayer adhesion allowing you to 3D print objects with an almost injection-molded precision. ApolloX is UV and weather resistant and by that ensuring great color stability – combined with high strength and heat resistant properties – which makes ApolloX™ a perfect engineering filament for outdoor and automotive applications. Unique features FDM/FFF-optimized Warp-free printing Optimized filament flowing behaviour, thermal stability, and inter-layer adhesion Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad Greatly improved mechanical properties and strength UV weather resistant Extremely high printing precision Printing with remarkable fine detail Engineered to be compliant to FDA food and drink contact articles General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 235 - 255° C Print speed: Medium Retraction: Yes - 5mm Heat bed: ± 80 - 90° C Fan speed: 0-25% Experience level: Beginner / Intermediate  *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length ρ: 1.11 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 18.7m ± 281m ± 861m ± 1685m ± 2996m Ø 2.85mm ± 7.1m ± 106m ± 325m ± 635m ± 1130m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands *) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number. *) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC -- REACH Directive 1907/2006/EC.